Square Latch for Case – With a flush-fit design, the 74 is a minimum height catch. It keeps a box closed with non-lock latching and is perfect for a limited mounting surface. If you are looking to lock with key, check out the 71 square lock. Order this non-locking latch today! PRODUCT DESCRIPTION Category: Catches
71 Lock
With a flush-fit design, the 71 is a minimum height square latch lock. It keeps a box secure with a key and is perfect for smaller mounting areas. If you are looking to latch with no lock, check out the 74 Catch. Shop a wide selection of square latches for sale here at Allen Field.
44333 Drawbolt
The 44333 is a sturdy drawbolt closure latch for fastening trunks and cases. This draw latch lock features a crimped wire loop and three rivet holes in the bottom piece. Available in various touches and finishes with plating, as well as no hole configuration for spot welding. Use this surface-mount hardware to secure your product
9007 Flat Clamp
Metal clamps, also known as “campaign hardware”, serve both to beautify and protect the corners of portable furniture. The 9007 Flat Clamp features a .14″ corner radius and two flat legs with rounded ends. With nickel or brass plating, these flat metal clamps can decorate your product with the luster while supporting the vulnerable case
9007-1/2 Curved Clamp
Metal clamps, also known as “campaign hardware”, serve both to beautify and protect the portable furniture. Our 9007-1/2 is a curved metal corner clamp with a .19″ corner radius. Featuring two rounded legs with screw holes, this clamp is easy to mount. Use these to secure the vulnerable corners and add a soft glow to
8053 Corner
The 8053 is a three-leg metal corner with one screw hole on each leg. It has a 0.31″ corner radius and measures 1.03″ from the screw hole to the center of the tab. Featuring a right angle, this corner is easy to mount with three screws. Available in nickel or brass plating. No matter what
8053 5/8 Corner
The 8053 5/8 is a medium-size corner that has two mounting legs with a screw hole on each leg. Molded with a 0.06″ corner radius in a right angle, this product is easy to install with only two screws. Whether you use it for surface mount, adding protection, or a decorative purpose, the 8053 5/8
8069-3 Corner
The 8069-3 is a two-leg large corner with one screw hole on each leg. Molded with a 0.5″ outer corner radius, this furniture corner guard is more rounded than other large corners. It measures 1.5″ from screw hole to center of the tab and is plated in nickel or brass. Whether you use it for
8069 1/2 Corner
The 8069 1/2 is a large corner that has three mounting legs with one screw hole on each leg. Molded with a 3/16″ corner radius in a right angle, this metal case corner is easy to install with three screws. Whether you use it for a protective or decorative purpose, the 8069 1/2 is class
8059 Corner
The 8059 Case Corner Protector is the most decorative hardware in this product line. It features a knee and three decorative legs to create an ornate finish while allowing for easy mounting with screws. This metal case corner bumper is ideal for jewelry boxes, doll cases, suitcases, and other small products! If you like this
8053 1/4 Corner
The 8053 1/4 corner has two mounting legs with a screw hole on each leg. It measures 1.03″ from screw hole to center of the tab. Molded with a 0.31″ corner radius in a right angle, this corner is also easy to install. Available in nickel or brass plating. No matter what product you put
8053 1/2 Corner
The 8053 1/2 is a medium corner that has three mounting legs with one screw hole on each leg. Molded with a 0.06″ corner radius in a right angle, this product is easy to install with three screws. Whether you use it for surface mount, adding protection, or a decorative purpose, the 8053 1/2 is